微桥科技产品新闻动态管理发布系统 现在是
首页 ·公司动态 ·产品动态 ·原厂动态 ·行业动态 ·技术资料 ·LED驱动 ·DC-DC ·AC-DC ·MOSFET ·音频功放 ·电池管理 ·霍尔及马达驱动 ·其他 ·联系我们

当前位置:首页>>电池管理>> EUP8095-1.5A Linear Li-Ion/Polymer Charger IC    双击自动滚屏
发布者:来自网络 发布时间:2014/7/25 阅读:5970次    关键字: 锂电充电
EUP8095-1.5A Linear Li-Ion/Polymer Charger IC


EUP8095-1.5A Linear Li-Ion/Polymer Charger IC  with Integrated FET and Charger Timer DataSheet

DESCRIPTION

The EUP8095 series are highly integrated single cell Li-Ion/Polymer battery charger IC designed for handheld devices. This charger is designed to work with various types of AC adapters or a USB port and capable of operating with an input voltage as low as 2.65V. The EUP8095 operates as a linear charger and charges the battery in three phases: trickle current, constant current, and constant voltage. When AC-adapter is applied, an external resistor sets the magnitude of the charge current,
which may be programmed up to 1.5A with TDFN10 package and a current-limited adapter for lowest power dissipation.
The EUP8095 features thermal regulation loop to control charge current to keep safe operation when PCB lacked of enough heat-sinking. A programmable charge timer provides a backup safety for termination. The EUP8095 automatically re-starts the charge if the battery voltage falls below an internal threshold and automatically enters sleep mode when DC supplies are removed. No external sense resistor or blocking diode is required for charging. A NTC thermistor interface is used for charging the battery in a safe temperature range.

FEATURES

•  Very Low Power Dissipation
•  Accepts Multiple Types of Adapters or USB BUS Power
•  Integrated Power FET and Current Sensor for Up to 1.5A Charge Applications
•  Guaranteed to Operate at 2.65V After Start-Up
•  Charge Termination by Minimum Current and Time
•  Precharge Conditioning With Safety Timer
•  Reverse Leakage Protection Prevents Battery Drainage
•  Charge Current Thermal Regulation
•  Status Outputs for LED or System Interface Indicates Charge and Fault Conditions
•  Optional Battery Temperature Monitoring Before and During Charge
•  Automatic Sleep Mode for Low-Power Consumption
•  Available in 3mm× 3mm TDFN-10 Package
•  RoHS Compliant and 100% Lead (Pb)-Free

APPLICATIONS

•  PDAs, Cell Phones and Smart Phones.
•  Portable Instruments.
•  Stand-Alone Charger.
•  USB Bus Powered Charger.

本文共分 1

  • 上篇文章EUP8057-1A Linear Charge Management Controllers
  • 下篇文章EUP8092-Li-ion/Li Polymer Battery Charger
  •  
     

    版权所有 Copyright Micro Bridge Technology Co.,Ltd. All rights reserved.粤ICP备05065909号