EMC5046-Standalone Linear Li-Ion Charger (1A,two-cell) with Thermal Regulation DataSheet

General Description
    The EMC5046 is a complete linear charger for two-cell lithium-ion batteries. With E-SOP-8 packages and few external components, EMC5046 is well suited for portable applications.
    No external sense resistor and blocking diode are required. Charging current can be programmed externally with a single resistor. The built-in thermal regulation facilitates charging with maximum power without risk of overheating.
    The EMC5046 always preconditions the battery with 1/10 of the programmed charge current at the beginning of a charge cycle, after it verifies that the battery can be fast-charged. The EMC5046 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.
    The EMC5046 features 13.5V maximum rating voltage for AC adapter, and it provides the charge current up to 1.0A. Other features include battery temperature monitoring, reverse current protection, shutdown mode, charging current monitor, under voltage lockout, automatic recharge and status indicator.

Features
 Programmable charge current up to 1.0A
 No MOSFET, sense resistor or blocking diode required
 Complete linear charger in E-SOP-8 for two-cell li-ion batteries
 Thermal regulation maximizes charge rate without risk of overheating
 Preset 8.4V charge voltage with ±1% accuracy
 Automatic recharge
 Charge status indicator
 C/10 charge termination
 5.8V trickle charge threshold
 Battery reverse leakage current less than 1uA

Applications
 Wireless handsets
 Hand-held instruments
 Portable information appliances