FP7150-350mA LED Driver with Internal Switch

FP7150 350mA LED Driver with Internal Switch

General Description

Download

The FP7150 is a continuous mode inductive step down converter. It can driving single or multiple series connected LEDs. The FP7150 includes the output switch and a high-side output current sensing circuit, which use an external resistor to set the average output current. Output current can also be adjusted by applying an external signal to the ˉADJˇ pin. The ADJ pin will accept either a DC voltage or a PWM waveform. The PWM filter components are contained within the chip. Applying a voltage under 0.2V to the ADJ pin will turn off the output. The device is assembled in a SOT23-5 pin package.

Data Sheet

Features

；350mA Output Current
；Internal 1.5A,30V Power MOSFET Switch
；Wide 7 to 30V Operating Input Range
；20uA Shutdown Mode Current
；Typical 4% Output Current Accuracy
；Signal pin ON / OFF and Brightness Control
；Adjustable Soft-Start
；Up to 95% Efficiency
；Up to 1MHz Switching Frequency
；Internal Dimming Filter