微桥科技产品新闻动态管理发布系统 现在是
首页 ·公司动态 ·产品动态 ·原厂动态 ·行业动态 ·技术资料 ·LED驱动 ·DC-DC ·AC-DC ·MOSFET ·音频功放 ·电池管理 ·霍尔及马达驱动 ·其他 ·联系我们

当前位置:首页>>电池管理>> EUP8054-Standalone Linear Li-Ion Battery Charger   双击自动滚屏
发布者:来自网络 发布时间:2014/7/25 阅读:6436次    关键字: 锂电充电
EUP8054-Standalone Linear Li-Ion Battery Charger


EUP8054/EUP8054X-Standalone Linear Li-Ion Battery Charger With Thermal Regulation in ThinSOT DataSheet

DESCRIPTION
      The EUP8054 is a complete constant-current/constant- voltage linear charger for single cell lithium-ion batteries. Its ThinSOT package and low external component count make the EUP8054 ideally suited for portable applications. Furthermore, the EUP8054 is specifically designed to work within USB power specifications.
      No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture. Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The EUP8054 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached.
      When the input supply (wall adapter or USB supply) is removed, the EUP8054 automatically enters a low current state, dropping the battery drain current to less than 2μA. The EUP8054 can be put into shutdown mode, reducing the supply current to 25μA.
      Other features include charge current monitor, undervoltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.

FEATURES
•  Programmable Charge Current Up to 800mA
•  No MOSFET, Sense Resistor or Blocking Diode Required
•  Complete Linear Charger in ThinSOT Package for Single Cell Lithium-ion Batteries
•  Constant-Current/Constant-Voltage Operation with Thermal Regulation to
   Maximize Charge Rate Without Risk of Overheating
•  Charges Single Cell Li-Ion Batteries Directly from USB Port
•  Preset 4.2V Charge Voltage with 1% Accuracy
•  Charge Current Monitor Output for Gas Gauging
•  Automatic Recharge
•  Charge Status Output Pin
•  C/10 Charge Termination
•  25μA Supply Current in Shutdown
•  2.9V Trickle Charge Threshold (EUP8054)
•  Available Without Trickle Charge (EUP8054X)
•  Soft-Start Limits Inrush Current
•  Available in TSOT-25, TDFN-6 (3mm x 3mm) Package
•  RoHS Compliant and 100% Lead (Pb)-Free

APPLICATIONS
•  Cellular Telephones/ PDAs/ MP3 Players
•  Charging Docks and CradIes
•  Bluetooth Applications

本文共分 1

  • 上篇文章EUP8092-Li-ion/Li Polymer Battery Charger
  • 下篇文章FP5209-5V/2.1A/2.4A/3.1A升压控制IC,替代ME2109,ME2319
  •  
     

    版权所有 Copyright Micro Bridge Technology Co.,Ltd. All rights reserved.粤ICP备05065909号