EUP9290-同步整流控制器 DataSheet

概述
EUP9290是一款高性能二次侧同步整流控制器。EUP9290控制NMOS以实现近乎理想二极管的特性进行整流，从而实现系统节能。EUP9290采用伏秒平衡控制方法而不直接与MOSFET的漏端相连，可实现更宽的输出电压应用范围。EUP9290内置系统频率检测，在极轻负载时进入待机模式。其适用于DCM、临界和CCM模式

特点
•适用5V-24V系统
•伏秒平衡控制方式
•适用DCM、临界和CCM模式
•短路保护
•SOT23-6和SOP-8 封装
•符合RoHS规范及Pb-Free

应用
•电视、显示器、网通电源等
•其它消费电子电源。

EUP9290-Synchronous Rectifier Controller 

Description
The EUP9290 is a high performance controller used to secondary side synchronous rectifier (SR).
The fundamental of EUP9290 is utilized N-channel MOSFET power devices used for secondary side synchronous to emulate a near-ideal diode rectifier. This method not only directly reduces power dissipation of the rectifier but also reduces primary side losses as well.
The EUP9290 is applied voltage-second balancing control method and not directly connected to the MOSFET drain, so it is ideal for flyback power supplies over the wide-output voltage range. The SR drive turn-off threshold is not related to the MOSFET RDS(on), which allows optimizing for maximum conduction time.
The EUP9290 offers a frequency detector to automatically switch to standby mode during low power conditions and pin fault protections. It is compatible with DCM, TM and CCM operation

Feature
•Secondary-Side SR Optimized Controller for 5V to 24V Flyback Systems
•Volt-Second Balance SR On-Time Control
•Compatible with Primary-Side and Second-Side Control
•CCM Operation Compatibility
•Short Pin Fault Protection
•Available in SOP-8 and SOT23-6 Packages
•RoHS Compliant and 100% Lead (Pb)-Free Halogen-Free

Application
•Switching Mode Power Supply(DCM, TM and CCM)
•Chargers for Smart Phones and Tablets
•High Efficiency Auxiliary Power in Server
Desktop and Appliance Application