AX3513A-1.4MHz,1A Synchronous Step-Down Converter

AX3513A-1.4MHz,1A Synchronous Step-Down Converter DataSheet

GENERAL DESCRIPTION
AX3513A is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture. The device is available in an adjustable version. Supply current with no load is 250uA and drops to <1uA in shutdown. The 2.5V to 5.5V input voltage range makes AX3513A ideally suited for single Li-Ion, two to three AA battery-powered applications. 100% duty cycle provides low dropout operation, extending battery life in portable systems. PWM operation provides very low output ripple voltage for noise sensitive applications. Switching frequency is internally set at 1.4MHz, allowing the use of small surface mount inductors and capacitors. The internal synchronous switch increases efficiency and decreases need of an external schottky diode. Low output voltages are easily supported with the 0.6V feedback reference voltage. AX3513A is available in small TSOT23-5L and TDFN-6L packages.

FEATURES
- 2.5V to 5.5V Input Voltage Range
- Output Voltage from 0.6V to VIN
- High Efficiency: Up to 96%
- 1.4MHz Constant Frequency Operation
- Up to 1A Output Current
- Quiescent Current: Quiescent Current: Quiescent Current: Quiescent Current: 250 uA ( uA ( TypicalTypical Typical)
- No Schottky Diode Required
- Current Mode Operation for Excellent Line and Load Transient Response
- Current limit, Enable function
- Short Circuit Short Circuit Short Circuit Short Circuit Protect (SCP) (SCP)
- Build in soft start function Build in soft start function Build in soft start function Build in soft start function
- ≤ 1μA Shutdown Current
- TSOT23-5L and TDFN-6L Pb-Free packages